Detects true standing heat with extreme accuracy. Improved timing increases pregnancy rates. Simple and clean application. Apply heat detectors prior to standing heat or when cows are given injections to synchronize their estrus. Limited supply of this color.
Availability: Limited supply of his color
When cows are mounted during standing heat the scratch off surface of the detector is rubbed off exposing a brilliant red, fuchsia, green, or blue signal layer underneath. Additional mountings result in increasing color exposure. You know exactly what's happening with no false readings.
Keep Heat Detectors Warm. The detector should be warmed to 100 degrees F or 38 degrees C immediately prior to application. This activates the adhesive and provides instant adhesion at lower temperatures. This can be done numerous ways including putting next to your skin until they are soft and flexible. For large quantities, put the detectors in a small cooler with a hot water bottle or other heat source
Site of Application. Ideal location for placement on the cow is between the hip and tail head with ESTROTECT™ evenly spaced perpendicular to the spine
Brush Hair Thoroughly. Create optimal conditions for adhesion by vigorously brushing the area of application with an ESTROTECT™ Brush. Brush with the grain of the hair to remove dirt, dust and shedding molting hair.
Note: Protect detectors from tail flicking by placing them near the top of the tail when fly counts are high. Do NOT brush hair with a steel bristle comb. Do not use stiff curry combs for brushing or cleaning
Clean the Hair. Clean the surface area with an ESTROTECT™ Cleaning Cloth to completely remove any remaining dirt, dust, sand or sawdust. The ESTROTECT™ Cleaning Cloth conditions the cows hair to receive the adhesive. As with brushing, wipe with the grain of the hair and fold the cleaning cloth as needed. ESTROTECT™ Cleaning Cloth remains effective as long as the cloth is still tacky to the touch.
Heat Detector Application. Place heat detector on the application site, press down firmly and rub into hair with bare fingers. Do not apply in rainy weather. Ideal location for placement on the cow is between the hip and tail head.
Heat Detection Tips:
Heat detection requires thorough observation regardless of which aid you choose to use. To help ensure success, follow these tips.
|Observe the cows for 30 minutes twice a day, early in the morning and early in the evening. Consider observations at noon when mounting activity is high.|
|Observe cows away from the feed bunk.|
|Hot weather, high production, crowded conditions or high stress environments may curtail mounting activity. Adjust your observations accordingly.|
|Cows in standing heat average about 1.5 mounts per hour and are in heat 6-8 hours.|
|Cows may be willing to mount others even though neither may stand for a mount.|
|Cows in pre-heat may bawl, be restless or sniff, lick or headbutt other cattle.|
Detects true standing heat with...